Tag: /dev/mapper

  • RHEL – How to Encrypt a Partition using Cryptsetup and LUKS

    EUTScglkIUlpZsV Cryptsetup uses dm-crypt to encrypt a disk at the partition level.  In RHEL, cryptsetup is used with Linux Unified Key Setup (LUKS), a disk encryption specification. Mounting a LUKS encrypted partiton requires a passphrase, which can either be passed in a file or via the command line. Read more about dm-crypt here.

    Anyway to use crypsetup, you first must have a free partiton on a disk. In this instance I am using /dev/sdc1, which is a freeagent external usb drive.

    First initialize the LUKS partition. My target is /dev/sdc1

    #cryptsetup luksFormat /dev/sdc1

    Then open the LUKS partition setup the dev mapper device. The command below creates /dev/mapper/freeagent

    #cryptsetup luksOpen /dev/sdc1 freeagent

    Create a passkey file if you want the device to be able to automount at boot. 

    #touch /root/freeagent_passkey && chmod 600 /root/freeagent_passkey

    Make cryptsetup aware of the key

    #cryptsetup luksAddKey /dev/sdc1 /root/freeagent_passkey

    #echo "mypasskey" > /root/freeagent_passkey

    Dont forget to make a filesystem

    #mkfs -t ext4 /dev/mapper/freeagent

    Then add the following to /etc/fstab…

    /dev/mapper/freeagent   /freeagent              ext4    _netdev         1 1

    And add the following to /etc/crypttab. Note that the first entry is the name of the /dev/mapper device

    freeagent       /dev/sdc1       /freeagent

    To get a status on a device and to see the mappings between /dev/mapper and /dev/sdc1

    #cryptsetup status

    /dev/mapper/freeagent
    /dev/mapper//dev/mapper/freeagent is active:
      cipher:  aes-cbc-essiv:sha256
      keysize: 128 bits
      device:  /dev/sdc1
      offset:  1032 sectors
      size:    2930270970 sectors
      mode:    read/write

    Make sure you keep track of when to use /dev/mapper/freeagent vs /dev/sdc1 in the commands above.