Tag: disk

  • Solaris: How to Resize a Swap Partition….on a disk without any free slices

    First lets detach the swap partition (submirror) on the secondary disk. Where d1 is the metadevice and d21 is the submirror

    #metadetach d1 d21
    d1: submirror d21 is detached
    
    metaclear d21
    d21: Concat/Stripe is cleared
    

    Now lets format Secondary Disk (c1t1d1 in this example)

    Below is the partition table of the disk that I am working with. Slice one will be resized using unallocated disk space. Add 1 to the last cylinder of slice 7 to determine your starting cylinder. In this case my new starting cylinder is 2691.

    Total disk cylinders available: 14087 + 2 (reserved cylinders)
    Part Tag Flag Cylinders Size Blocks
    0 root wm 0 - 824 4.00GB (825/0/0) 8395200
    1 swap wu 825 - 1031 1.00GB (207/0/0) 2106432
    2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
    3 unassigned wm 1032 - 1038 34.78MB (7/0/0) 71232
    4 var wm 1039 - 1657 3.00GB (619/0/0) 6298944
    5 home wm 1658 - 2070 2.00GB (413/0/0) 4202688
    6 stand wm 2071 - 2277 1.00GB (207/0/0) 2106432
    7 stand wm 2278 - 2690 2.00GB (413/0/0) 4202688
    

    Now resize the partition
    In this case I am going to use the rest of the disk, which according to the information for partition two, ends @ cylinder 14087. Subtract 2691 from 14087, to determine how many cylinders your slice is going to be.

    Enter partition id tag[swap]:
    Enter partition permission flags[wu]:
    Enter new starting cyl[825]: 2691
    Enter partition size[2106432b, 207c, 1028.53mb, 1.00gb]: 11396c
    

    Now save this new partition scheme

    Enter table name (remember quotes): my_table
    

    Then label your disk. As you can see below, my swap partition is now huge.

    Part Tag Flag Cylinders Size Blocks
    0 root wm 0 - 824 4.00GB (825/0/0) 8395200
    1 swap wu 2691 - 14086 55.30GB (11396/0/0) 115965696
    2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
    3 unassigned wm 1032 - 1038 34.78MB (7/0/0) 71232
    4 var wm 1039 - 1657 3.00GB (619/0/0) 6298944
    5 home wm 1658 - 2070 2.00GB (413/0/0) 4202688
    6 stand wm 2071 - 2277 1.00GB (207/0/0) 2106432
    7 stand wm 2278 - 2690 2.00GB (413/0/0) 4202688
    Now lets Swap the Swap
    
    
    First, reinitialize swap submirror.
    metainit d21
    d21: Concat/Stripe is setup
    

    Add swap to new submirror

    \swap -a /dev/md/dsk/d21
    

    View swap

    swap -l
    swapfile dev swaplo blocks free
    /dev/md/dsk/d1 85,1 16 2106416 2106416
    /dev/md/dsk/d21 85,21 16 115965680 115965680
    

    Remove the metadevice from swap

    swap -d /dev/md/dsk/d1
    

    Verify that previous step worked

    swap -l
    swapfile dev swaplo blocks free
    /dev/md/dsk/d21 85,21 16 115965680 115965680
    

    Clear Metadevice/Mirror

    metaclear d1
    Mirror is cleared
    Clear Metadevice/submirror
    metaclear d11
    d11: Concat/Stripe is cleared
    

    Format Primary Disk (c1t1d0 in this example)

    Select a predefined table

    partition> select
    0. original
    1. my_table
    Specify table (enter its number)[0]: 1
    View the partition table, and make sure it looks right.
    
    Total disk cylinders available: 14087 + 2 (reserved cylinders)
    
    Part Tag Flag Cylinders Size Blocks
    0 root wm 0 - 824 4.00GB (825/0/0) 8395200
    1 swap wu 2691 - 14086 55.30GB (11396/0/0) 115965696
    2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
    3 unassigned wm 1032 - 1038 34.78MB (7/0/0) 71232
    4 var wm 1039 - 1657 3.00GB (619/0/0) 6298944
    5 home wm 1658 - 2070 2.00GB (413/0/0) 4202688
    6 stand wm 2071 - 2277 1.00GB (207/0/0) 2106432
    7 stand wm 2278 - 2690 2.00GB (413/0/0) 4202688
    
    Label disk
    partition> label
    Ready to label disk, continue? y
    

    Put things back the way they were.

    Reinitialize the swap submirror on the primary disk

    metainit d11
    d11: Concat/Stripe is setup
    

    Reinitialize Metadevice Mirror

    metainit d1
    d1: Mirror is setup
    
    Add the metadevice to swap
    swap -a /dev/md/dsk/d1
    

    … and verify that it took

    swap -l
    swapfile dev swaplo blocks free
    /dev/md/dsk/d21 85,21 16 115965680 115965680
    /dev/md/dsk/d1 85,1 16 115965680 115965680
    

    Remove the submirror that you added to swap in the step above

    swap -d /dev/md/dsk/d21
    

    Reattach Submirror d21 to Mirror d1

    metattach d1 d21
    d1: submirror d21 is attached
    

    Redefine dump device

    dumpadm -d swap
    Dump content: kernel pages
    Dump device: /dev/md/dsk/d1 (swap)
    Savecore directory: /var/crash/blahblah
    Savecore enabled: yes
    

    Related articles

    SwapFaq’s
    Repartitioning a Linux Cloud Server
    HomeLab: Cisco Switch Boot Alternate IOS Image
    Solaris 9 Scan for New SAN Luns & and Vertias Volume Manager Quick Start
  • Solaris HBA Notes

    Below is a cheat sheet that I put together of commands that are helpful for managing HBAs on Solaris.

    Helpful Commands

    • luxadm probe
    • luxadm -e port
    • devfsadm

    More Helpful Commands

    • To show Sun/Qlogic HBA’s:

    luxadm qlgc

    • To show all vendor HBA’s — see sample output below:

    luxadm fcode_download -p

    Found Path to 0 FC100/S Cards

    Complete

    Found Path to 5 FC100/P, ISP2200, ISP23xx Devices

    Opening Device: /devices/pci@9,600000/SUNW,qlc@2/fp@0,0:devctl

    Detected FCode Version:       ISP2200 FC-AL Host Adapter Driver: 1.14 01/11/20

    Opening Device: /devices/pci@8,700000/SUNW,qlc@5,1/fp@0,0:devctl

    Detected FCode Version:       ISP2312 Host Adapter Driver: 1.14.09 03/08/04

    Opening Device: /devices/pci@8,700000/SUNW,qlc@3,1/fp@0,0:devctl

    Detected FCode Version:       ISP2312 Host Adapter Driver: 1.14.09 03/08/04

    Opening Device: /devices/pci@8,700000/SUNW,qlc@3/fp@0,0:devctl

    Detected FCode Version:       ISP2312 Host Adapter Driver: 1.14.09 03/08/04

    Opening Device: /devices/pci@8,700000/SUNW,qlc@5/fp@0,0:devctl

    Detected FCode Version:       ISP2312 Host Adapter Driver: 1.14.09 03/08/04

    Complete

    • Another Method of doing the same thing as above:

    prtpicl -v > filename

    • To show link status of card:

    luxadm -e port

    • See WWNS:

    To see the WWN’s (using address given to you from previous commands), it is
    the last one that specifies it is a HBA, so the port WWN here is 210000e08b100d16

    # luxadm -e dump_map /devices/pci@1f,0/pci@1/SUNW,qlc@1/fp@0,0:devctl

    Pos Port_ID Hard_Addr Port WWN Node WWN Type

    0 10600 0 224100015d210900 220000015d210900 0x1f (Unknown Type)

    1 10700 0 210000e08b103417 200000e08b103417 0x1f (Unknown Type)

    2 10800 0 210000e08b100d16 200000e08b100d16 0x1f (Unknown Type,Host Bus Adapter

    Configuring storage online

    • List unconfigured disks

    cfgadm -al

    Ap_Id Type Receptacle Occupant Condition

    c0 scsi-bus connected configured unknown

    c0::dsk/c0t0d0 disk connected configured unknown

    c0::dsk/c0t2d0 CD-ROM connected configured unknown

    c1 fc-fabric connected unconfigured unknown

    c1::210000e08b103417 unknown connected unconfigured unknown

    c1::224100015d210900 unknown connected unconfigured unknown

    c2 fc-fabric connected unconfigured unknown

    c2::210100e08b303417 unknown connected unconfigured unknown

    c2::223100015d210900 unknown connected unconfigured unknown

    So we can see that c1 and c2 are both unconfigured disks, so we now run the command below to configure them.

    # cfgadm -f -c configure c1 c2

    You can now run devfsadm.

    Example cfgadm -al

    c1                             fc-private

    c1::21000020379cb9bb           disk         connected    configured   unknown

    c4                             fc-fabric    connected    unconfigured unknown

    c5                             fc           connected    unconfigured unknown

    C1 is a 280r internal controller
    C4 is a HBA attached to a switch with no targets
    C5 is a HBA that has nothing connected

    More Good Stuff

    1) The command cfgadm -al

    2) look for the fc-fabric

    c2                             fc-fabric    connected

    c3                             fc-fabric    connected

    3) and then cfgadm -cconfigure c2 c3

    4) Now you see the LUN

    A Magical File – Check it Out

    /kernel/drv/sd.conf

    Checking IO on Fibre Cards

    iostat -xcn 5

    San Foundation Kit

    You get this from Sun, install it after you install the drivers
    There is no SAN foundation kit for Solaris 10. Installing the SAN foundation
    kit will do bad things. It’s only for Solaris 8 and Solaris 9.

    Get the WWN

     Method 1:

     

    $ luxadm probe
    $ luxadm -e port

    $ luxadm -e dump_map <xyz> where xyz= your connected port.

    Method 2:

    bash-2.03# cat /var/adm/messages | grep -i WWN

    Sep 20 18:23:28 alautpnc003 qlc: [ID 657001 kern.info] Qlogic qlc(0) WWPN=210000e08b934ead : WWNN=200000e08b934ead

    Sep 20 18:23:39 alautpnc003 qlc: [ID 657001 kern.info] Qlogic qlc(1) WWPN=210100e08bb34ead : WWNN=200100e08bb34ead

    Method 3:

    #modinfo | grep SunFC

    46 10274e94 20010 172 1 fcp (SunFC FCP v20050926-1.86)

    47 10269923 8204 – 1 fctl (SunFC Transport v20050926-1.36)

    51 1028b850 15e28 171 1 fp (SunFC Port v20050926-1.53)

    53 10300f09 c5024 175 1 qlc (SunFC Qlogic FCA v20051013-2.08)

    Method 4:

    cfgadm -o show_FCP_dev -al

    Method 5:

    prtconf -pv | grep -i wwn | grep -i port