Tag: metastat

  • Solaris: How to Resize a Swap Partition….on a disk without any free slices

    First lets detach the swap partition (submirror) on the secondary disk. Where d1 is the metadevice and d21 is the submirror

    #metadetach d1 d21
    d1: submirror d21 is detached
    
    metaclear d21
    d21: Concat/Stripe is cleared
    

    Now lets format Secondary Disk (c1t1d1 in this example)

    Below is the partition table of the disk that I am working with. Slice one will be resized using unallocated disk space. Add 1 to the last cylinder of slice 7 to determine your starting cylinder. In this case my new starting cylinder is 2691.

    Total disk cylinders available: 14087 + 2 (reserved cylinders)
    Part Tag Flag Cylinders Size Blocks
    0 root wm 0 - 824 4.00GB (825/0/0) 8395200
    1 swap wu 825 - 1031 1.00GB (207/0/0) 2106432
    2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
    3 unassigned wm 1032 - 1038 34.78MB (7/0/0) 71232
    4 var wm 1039 - 1657 3.00GB (619/0/0) 6298944
    5 home wm 1658 - 2070 2.00GB (413/0/0) 4202688
    6 stand wm 2071 - 2277 1.00GB (207/0/0) 2106432
    7 stand wm 2278 - 2690 2.00GB (413/0/0) 4202688
    

    Now resize the partition
    In this case I am going to use the rest of the disk, which according to the information for partition two, ends @ cylinder 14087. Subtract 2691 from 14087, to determine how many cylinders your slice is going to be.

    Enter partition id tag[swap]:
    Enter partition permission flags[wu]:
    Enter new starting cyl[825]: 2691
    Enter partition size[2106432b, 207c, 1028.53mb, 1.00gb]: 11396c
    

    Now save this new partition scheme

    Enter table name (remember quotes): my_table
    

    Then label your disk. As you can see below, my swap partition is now huge.

    Part Tag Flag Cylinders Size Blocks
    0 root wm 0 - 824 4.00GB (825/0/0) 8395200
    1 swap wu 2691 - 14086 55.30GB (11396/0/0) 115965696
    2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
    3 unassigned wm 1032 - 1038 34.78MB (7/0/0) 71232
    4 var wm 1039 - 1657 3.00GB (619/0/0) 6298944
    5 home wm 1658 - 2070 2.00GB (413/0/0) 4202688
    6 stand wm 2071 - 2277 1.00GB (207/0/0) 2106432
    7 stand wm 2278 - 2690 2.00GB (413/0/0) 4202688
    Now lets Swap the Swap
    
    
    First, reinitialize swap submirror.
    metainit d21
    d21: Concat/Stripe is setup
    

    Add swap to new submirror

    \swap -a /dev/md/dsk/d21
    

    View swap

    swap -l
    swapfile dev swaplo blocks free
    /dev/md/dsk/d1 85,1 16 2106416 2106416
    /dev/md/dsk/d21 85,21 16 115965680 115965680
    

    Remove the metadevice from swap

    swap -d /dev/md/dsk/d1
    

    Verify that previous step worked

    swap -l
    swapfile dev swaplo blocks free
    /dev/md/dsk/d21 85,21 16 115965680 115965680
    

    Clear Metadevice/Mirror

    metaclear d1
    Mirror is cleared
    Clear Metadevice/submirror
    metaclear d11
    d11: Concat/Stripe is cleared
    

    Format Primary Disk (c1t1d0 in this example)

    Select a predefined table

    partition> select
    0. original
    1. my_table
    Specify table (enter its number)[0]: 1
    View the partition table, and make sure it looks right.
    
    Total disk cylinders available: 14087 + 2 (reserved cylinders)
    
    Part Tag Flag Cylinders Size Blocks
    0 root wm 0 - 824 4.00GB (825/0/0) 8395200
    1 swap wu 2691 - 14086 55.30GB (11396/0/0) 115965696
    2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
    3 unassigned wm 1032 - 1038 34.78MB (7/0/0) 71232
    4 var wm 1039 - 1657 3.00GB (619/0/0) 6298944
    5 home wm 1658 - 2070 2.00GB (413/0/0) 4202688
    6 stand wm 2071 - 2277 1.00GB (207/0/0) 2106432
    7 stand wm 2278 - 2690 2.00GB (413/0/0) 4202688
    
    Label disk
    partition> label
    Ready to label disk, continue? y
    

    Put things back the way they were.

    Reinitialize the swap submirror on the primary disk

    metainit d11
    d11: Concat/Stripe is setup
    

    Reinitialize Metadevice Mirror

    metainit d1
    d1: Mirror is setup
    
    Add the metadevice to swap
    swap -a /dev/md/dsk/d1
    

    … and verify that it took

    swap -l
    swapfile dev swaplo blocks free
    /dev/md/dsk/d21 85,21 16 115965680 115965680
    /dev/md/dsk/d1 85,1 16 115965680 115965680
    

    Remove the submirror that you added to swap in the step above

    swap -d /dev/md/dsk/d21
    

    Reattach Submirror d21 to Mirror d1

    metattach d1 d21
    d1: submirror d21 is attached
    

    Redefine dump device

    dumpadm -d swap
    Dump content: kernel pages
    Dump device: /dev/md/dsk/d1 (swap)
    Savecore directory: /var/crash/blahblah
    Savecore enabled: yes
    

    Related articles

    SwapFaq’s
    Repartitioning a Linux Cloud Server
    HomeLab: Cisco Switch Boot Alternate IOS Image
    Solaris 9 Scan for New SAN Luns & and Vertias Volume Manager Quick Start